Copyright
© Monti 3D Printing Solutions. All rights reserved. This manual may not be reproduced in whole or in part, by any means, without written permission from Monti 3D Printing Solutions.
Disclaimer
Please read and understand all information presented in this manual prior to attempting to print a Pithon sensor. Failure to adhere to the procedures outlined in this documentation may lead to personal injury, poor quality, or non-functional sensors, or damage to the 3D printer or other equipment. All operators using a 3D printer to manufacture any aspect of Pithon must be well trained in the use of their 3D printer and follow the manufacturer’s specifications and guidelines. Pithon sensors, structures, and parts must not be left unattended while printing. Monti does not assume responsibility for any loss, injury, or damage arising from the production or use of any Pithon sensor. Pithon is not intended for use in safety critical applications; use at your own risk.
All information provided within this manual has been gathered from reliable sources and internal development, however Monti provides no warranty of the correctness of any information provided in this manual.
Warranty Information
Monti 3D Printing Solutions offers no warranty to any sensor produced or calibrated through Pithon manufacturing methods. Additionally, Monti provides no warranty for any aspect of all Pithon manufacturing and calibration processes. Subscription and availability of Pithon services – including but not limited to documentation – may be cancelled at any time, for any reason.
Customer Support
Additional documentation and resources about Pithon on our online support pages: https://3d-printed-sensors-development-platform.readthedocs.io/en/latest/index.html.
Please address any questions to Monti’s Design Team at kmgreen@sfu.ca.
Safety
Safety Messages
This manual displays warnings and safety related notices in the following format.
The above symbol indicates that damage to property may occur if the provided precautions are not taken.
The above symbol indicates that minor injuries may occur if the provided precautions are not taken.
The above symbol indicates a high probability that major injury or death may occur if the provided precautions are not adhered to.
The above warning provides general safety related information or measures.
As applicable, these safety messages will be listed in order of highest risks first.
Hazards
Manufacturing Hazards
Manufacturing hazards are as follows.
Improperly installed 3D printers may present a risk of electrocution. Ensure the 3D printer is installed and operated as per the Manufacturer’s specification as described in the 3D printer’s User Manual.
3D printers have nozzles that reach temperatures above 200°C, and some models have heated print beds. Refer to your 3D printer’s User Manual on how to operate the device safely.
3D printers have multiple moving parts, that may damage objects or body parts caught in their motion. Always operate 3D printer as specified in their User Manual.
3D printing filaments may release volatile organic compounds (VOCs) during the printing process. VOCs can cause symptoms including headache, fatigue, and confusion. Follow all safety precautions outlined in the material safety data sheet (MSDS) and your 3D printer’s User Manual.
Operating Hazards
Operating hazards are as follows.
Laboratory-grade power sources can generate power sufficient to cause electrocution. Always operate power sources and measurement equipment as per manufacturer’s specifications.
When applying a larger power, above Pithon’s rated voltage and current limits, the sensor may self-heat to high temperatures. Do not handle or touch any part of the Pithon sensor when applying a high voltage or current.